Select Perform. Weed DTUB
Make your look complete
Unifiber fin screw (with washer)
Fin bolt stainless steel M6 + stainless steel washer + Rubber washer
The fin screws for your windsurfboard are made of stainless steel. Because of this, the fin screws will not rust. With a standard screw thickness of M6, this screw will suit all windsurfing fins with a power and tuttle box.
Screw length:
The screws come in different lengths. The screws are available from 35 mm to 100 mm. But exactly which screw length should you have?
To answer the question above, the easiest answer is to just take the same screw length as your 'old' fin bolt. With a powerbox, this is usually a 50mm. With a tuttlebox, this size is different.
Still not sure about the right screw length or the ideal size isn't among them? Then look for a large screw and cut it to the right size.
Included:
- Stainless steel M6 fin screw
- Stainless steel washer
- Rubber washer
Description / Select Perform. Weed DTUB
Select. Perform. Weed DTUB
Weed Fins
Looking for a new weed fin to just surf right through the weed? Then check out the Select performance weed deeptuttle fin.
This fin offers you all the qualities you are looking for in a good, sharp weed fin. The weed fin is released in a medium down angle. The rigid fin base offers stable support, the twist and flex tip at the bottom improve lift and the comfortable surfing feeling. The flex tip is designed to reduce hard hits on contact with the bottom.
Note! This is the deep tuttle box fin.
Fatures of the Select. Perform. Weed DTUB
- Powerful fin
- Stable supports
- Very good upwind ability
More Information
| Color | Multi color |
|---|---|
| Brand | Select |
| Supplier color | . |
| Supplier number | SM0370400 |
| Articlenumber | 00004948 |
| Fin box | Discipline | Material |
| Windsurf fin | ||
| Windsurf fin | ||
| Windsurf fin | ||
| Windsurf fin |