Unifiber Anti-Weed Less. G10 PB
Make your look complete
Unifiber fin screw (with washer)
Fin bolt stainless steel M6 + stainless steel washer + Rubber washer
The fin screws for your windsurfboard are made of stainless steel. Because of this, the fin screws will not rust. With a standard screw thickness of M6, this screw will suit all windsurfing fins with a power and tuttle box.
Screw length:
The screws come in different lengths. The screws are available from 35 mm to 100 mm. But exactly which screw length should you have?
To answer the question above, the easiest answer is to just take the same screw length as your 'old' fin bolt. With a powerbox, this is usually a 50mm. With a tuttlebox, this size is different.
Still not sure about the right screw length or the ideal size isn't among them? Then look for a large screw and cut it to the right size.
Included:
- Stainless steel M6 fin screw
- Stainless steel washer
- Rubber washer
Description / Unifiber Anti-Weed Less. G10 PB
Weed Lessacher G10
Anti-Weed / Powerbox
Together with the 'famous weed proffesor - Wolfgang Lessacher - this asymmetric weed fin was developed from durable G10 material. The stiff profile gives the right power for perfect elevator and maximum speed. The fin is further forward in the box to give easier elevator.
The Lessacher Weed approaches the performance of normal fins and proves to be one of the best solutions to the weed problem.
Important: choose the fin roughly 8 - 10 cm smaller than your normal fin.
Features Weed Lessacher G10
- Lessacher Design "A-symmetric" fin profile for maximum performance
- G10 impact resistance
- Very good alternative as well for shallow waters
More Information
| Color | Multi color |
|---|---|
| Brand | Unifiber |
| Supplier color | 950. |
| Supplier number | UF03702 |
| Articlenumber | 00003763 |
| Product Label | Telstar's choice |
| Fin box | Discipline | Material |
| Windsurf fin | ||
| Windsurf fin | ||
| Windsurf fin | ||
| Windsurf fin | ||
| Windsurf fin |